Why there is no flat rate
The cost of a rural fence is set by the ground and the specification far more than by the length, which is why this site publishes no rate. A straight run of plain wire across a flat cropping paddock at Cudal and the same length of netting over a basalt ridge and two gullies at Nashdale are different jobs with different numbers.
What you can do is make sure every quote you receive is pricing the same fence. The rest of this page lists the things that move the figure around Orange, roughly in order of how much they matter.
The ground
Ground is the biggest unknown in tablelands fencing. Four things about it change a quote:
- Slope. Steep faces slow every step, limit where a tractor can work and need more strainers to carry changes in grade.
- Rock. Basalt floaters and shale near the surface stop a post driver. Posts then have to be drilled, moved or set another way. Ask how rock is charged if it turns up.
- Wet ground. Soft gullies and spring-fed soaks hold posts poorly and bog machines. The Bureau of Meteorology's Orange station averages 924 mm of rain, and in a wet winter some lines cannot be reached at all (Bureau of Meteorology).
- Crossings. Each creek or gully crossing is a small job of its own, with its own strainers and a floodgate or sacrificial section.
The specification
The second driver is what the fence is made of. Two quotes for "a sheep fence" can differ a lot and both be fair, because they are quoting different materials.
| Choice | How it moves the quote | What to ask |
|---|---|---|
| Netting or plain wire | Prefabricated netting costs more per roll than plain wire but goes up quickly on good ground. | The product, height and wire grade |
| Wire grade | One manufacturer's data sheet lists mild steel, light high tensile and high tensile versions of the same netting. Heavier and stronger grades cost more. | Which grade is quoted, in writing |
| Posts | Steel pickets, treated pine and hardwood are priced differently and spaced differently. | Material, size and spacing |
| Strainers and stays | End assemblies take the most labour and the biggest timber. More corners means more of them. | How many, what species or treatment class |
| Gates | Each gateway needs two solid posts and a gate. Wide machinery gates cost more than stock gates. | Number, width and material |
| Electric components | An energiser, earth system and offsets add a fixed cost that is spread over the length. | Energiser size and what is included |
The wire grades in that table come from one manufacturer's data sheet, and timber is rated in durability classes by a timber industry education body. Neither is a NSW requirement for farm fences. They are there so you know what words to look for on a quote.

Access and clearing
A contractor prices the time it takes to get materials along the line. A fence beside a farm track is quick. One through timber, blackberry or briar has to be cleared first, and somebody has to pay for the dozer or the slasher. If native trees are involved, clearing limits apply and differ by zone, so read the approvals and clearing guide before the line is pushed.
Old fences cost money too. Pulling out and rolling up old wire, digging out strainers and carting it all away can be a real share of a replacement job. Doing the removal yourself, if the contractor agrees, is one of the few ways to bring a quote down without cutting the specification.
Distance, size and timing
Travel is built into every quote. A crew driving an hour each way from town loses a quarter of the day, and a short job a long way out carries that cost over very few metres. Long runs cost less per unit than short ones for the same reason: the setup, the strainers and the travel are spread further.
Timing matters as well. Fencers around Orange are busiest in the drier months and after any flood or fire. If your job can wait for a quiet spell, say so, and ask whether that changes the price.
Sharing the cost
On a boundary, the usual rule is that adjoining owners share the cost of a sufficient fence equally and anyone wanting more pays the extra. That only works if the quote separates the base fence from the extras. See farm boundary fencing for how to set that up, and the dividing fences guide for the process when a neighbour will not engage.
Comparing two quotes
Line them up side by side and check that each states the measured length, the fence type and wire grade, post material and spacing, the number and type of strainers, each gate, each crossing, old fence removal, what happens if rock is struck, who checks for powerlines and underground services, and the payment terms. Where one quote is silent, ask. The contractor guide has the full list of questions, and you can start a quote from the contact page.
What this guide cannot give you
This guide cannot give you a price, a rate or a budget figure, and it would mislead you if it tried. It cannot tell you whether a quote you have received is fair, because that depends on ground only the contractor has walked. The material facts quoted are from a manufacturer and an industry body and are examples, not requirements. A written, itemised quote from someone who has seen the line is the only number worth planning around.
Check the current rules before you rely on this
This page describes the factors that change the cost of a rural fence around Orange and what a quote should itemise. It describes the rules in general terms as they stood in November 2026. Standards, forms, thresholds and fines change.
The authoritative sources are Bureau of Meteorology, Orange Agricultural Institute climate statistics (station 063254), One manufacturer's hinge joint livestock fence data sheet (manufacturer claims are the manufacturer's), Australian timber industry education body, fencing (durability classes and treatment), NSW Government, native vegetation allowable activities (rural infrastructure, fences) and Dividing Fences Act 1991 (NSW), in-force version dated 7 December 2024 (check the current version). Where anything here differs from those sources, they are right and we are not.
We are not fencing contractors, builders, regulators or lawyers. For what applies to your fence, ask the contractor which licence or registration they hold for your job, then ask NSW Fair Trading or Building Commission NSW if you are unsure, and ask the council that covers the land.
Accurate at the time of writing, November 2026. Always check the source before relying on it.